ELECTRONIC SPACE PRODUCTS INTERNATIONAL


1050 Benson Way, Ashland, OR 97520

Toll Free (800) 638-2581 * Fax (541) 488-8313

E-Mail: sales@espimetals.com

 

 

MATERIAL SAFETY DATA SHEET

 

 

 

I            PRODUCT IDENTIFICATION


 

 

Trade Name:      Ammonium Hexabromoosmate IV                                             Formula:            (NH4)2OsBr6

 

 

II           HAZARDOUS INGREDIENTS


 

 

%: 100                                                                                                                    TLV(Units): 1.0 mg/m3

 

 

III         PHYSICAL DATA


 

 

Melting Point:                  N/A                                                                               Specific Gravity:              N/A

Appearance and Odor:    Black/brown crystalline powder.                                  Solubility in Water:         Very soluble

 

 

IV         FIRE AND EXPLOSION HAZARDS DATA


 

 

Flash Point: N/A                                                                                                    Flammable Limits: Not flammable

Extinguishing Media: CO2, Foam, dry chemical.

 

Special Firefighting Procedures: Self-contained breathing apparatus.

Unusual Fire and Explosion Hazards: May emit toxic fumes upon decomposition.

 

 

V           HEALTH HAZARD INFORMATION


 

 

Effects of Over Exposure: Mucus membrane irritant, corrosive solid may cause chemical burns to skin.

 

EMERGENCY AND FIRST AID PROCEDURES: Remove patient from area of exposure to fresh air.

 

EXTERNAL: Flush with soap and water for 15 minutes.

EYES: Flush with eye bath.

INTERNAL: Contact poison control center/physician.

 

 

VI         REACTIVITY DATA


 

 

Stability: Stable

Conditions to Avoid: Extreme heat.

 

Hazardous Decomposition Products: OsO4, Br-

Incompatible Materials: All acids, metal powders, organic solvents.

Hazardous Polymerization: Will not occur

 

 

 

 

VII        SPILL OR LEAK PROCEDURES


 

 

Steps to Be Taken in Case Material Is Released or Spilled: Sweep up and place in airtight plastic container.

 

Waste Disposal Method: Dispose of in accordance with all Local, State, and Federal regulations.

 

 

VIII      SPECIAL PROTECTION INFORMATION


 

 

Respiratory Protection: NIOSH/MSHA approved.

Ventilation: Fume hood

 

Protective Gloves: Rubber for all contact

Eye Protection: Goggles

 

Other Protective Equipment: Normal labwear.

 

 

IX         SPECIAL PRECAUTIONS


 

 

Other Precautions: Store in cool dry place, keep tightly sealed when not in use, read MSDS before using.

 

Precautionary Labeling: In compliance with OSHA and NFPA requirements.

 

              The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. ESPI shall not be held liable for any damage resulting from handling or from contact with the above product.

 

 

Issued By:           Steve Dierks

Date:                    November 1994